GM-H01
Description
Material: The shell is made of high-impact ABS material.
Features
The top of the cap is H” shaped, with slots on both sides for wearing a protective mask or other sound insulation equipment, etc.; the cap lining is a 6-point fabric inner village, which can be adjusted by rotation, and snap buttons can be used mode adjustment configuration.
GM-3 helmet (ABS)
Description
Material: The shell is made of ABS engineering plastics for safety helmets.
Features
The hat shape is novel and elegant, and the top is designed as louver-style vents on both sides, which can speed up the heat removal; there are slots on both sides, which can wear protective masks and sound insulation, etc.; the hat lining is 6-point fabric lining, knob type Adjustment.
Standard
GB2811-2019、CE EN397: 2012、ANSI Type 1 Class C
GM-6 Hard Hat (FRP)
Material: The shell is made of FRP.
Features
Both the front and back are sprayed with environmentally friendly paint, beautiful in appearance and good in rigidity; the cap shape is designed as a round dome with a small brim; it has high temperature resistance and cold resistance; the cap lining is a 4-point fabric lining , Knob adjustment, optional push-button adjustment configuration.
Standard
GB2811-2019, CE EN397: 2012
GM-16 helmet (ABS)
Material: The shell is made of high-impact ABS material.
Features
The top of the cap is “H” shaped, and vent holes are designed on both sides and the back to facilitate the heat dissipation of the head and accelerate the discharge of heat in the cap; there are slots on both sides for wearing a protective mask or other Sound insulation equipment, etc.; the cap lining is a 6-point fabric inner village, with knob-type adjustment, and a button-type adjustment configuration can be selected.
Standard
GB2811-2019, CE EN397: 2012
GM-26 hard hat (PP)
Material: The shell is made of high-impact polypropylene (PP).
Features
Widened brim design, better sunshade effect; fashion “M” shape on the top of the shell, with 6 air holes designed on both sides, novel and chic, comfortable to wear; hat lining is 4-point PE inner Lining with snap-button adjustment.
Standard
GB2811-2019, CE EN397: 2012
GM-19 helmet (ABS)
Material: The shell is made of high-impact ABS material.
Features
The top of the cap is in a fashionable “M” shape, with 6 air holes designed on both sides, which is novel and unique in style; there are slots on both sides for wearing protective masks or other sound insulation equipment, etc.; the cap lining is 6 Textile lining with dots, knob adjustment, optional snap adjustment configuration.
Standard
GB2811-2019, CE EN397: 2012